1076B50 EXHAUST PIPE ATTACHMENT TO ENGINE - R + R - Alfa - 156 - eLearn

3237705 - 1076B50 exhaust pipe attachment to engine - r + r

) Position the vehicle on the ramp.Raise the vehicle.1. Undo the bolts fixing the exhaust pipe attachment to the manifold.2. Undo the nuts (2a) and remove the reinforcement bracket (2b).3. Undo the nut fixing the rigid support to the exhaust pipe attachment to the manifold.4. Undo the bolts (4a) and remove the exhaust pipe attachment to the manifold (4b) complete with gaskets (4c).

Refitting ( Removing

) Fit the exhaust pipe attachment to the manifold complete with gaskets, and fix it to the catalytic converter tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	EXHAUST PIPE TO ENGINE	M8	2.0 - 2.5

Tighten the nut fixing the rigid support to the exhaust pipe attachment to the manifold.Fit the reinforcement bracket and fix it using the nuts.Tighten the bolts securing the front exhaust pipe section to the turbocharger to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FLEXIBLE PIPE SECTION TO ENGINE	M8	2.0 - 2.5

Lower the vehicle.Remove the car from the ramp.