3238019 - 2710A10 drive shaft with joints (one), l/h or r/h - r + r

Removing ( Refitting )  - 4410A80  damper lower fork - r r - 4450B10  Front WHEEL (one) - R.R. - 7055B64  Engine compartment DUST shield in front wheel arch (one), left or right - R.R.1. Remove the bevel and undo the nut fixing the driveshaft to the wheel hub.2. Undo the bolts (2a) and remove the half shaft (2b) complete with joints.

The bolts securing the front half shafts, intermediate half shaft/differential inner half shaft side, have been treated with Eslok type locking compound; therefore every time they are removed they must be replaced.

Fit the right half shaft complete with joints and tighten the new bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT DRIVE SHAFT COMPLETE WITH JOINTS	M10	5.0 ÷ 6.1

Fit the left half shaft complete with joints and tighten the new bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT DRIVE SHAFT COMPLETE WITH JOINTS	M8	(Int. diff./ intermediate. driveshaft. side.) 3.6 ÷ 4.4