3233508 - CYLINDER HEAD
| Camshaft bearing diameter (mm) | Validity |  | ||
|---|---|---|---|---|
| 26.045 - 26.070 | 2.0 JTS | |||
| Combustion chamber minimum permissible height (mm) | Validity |  | ||
| 12.8 ÷ 13.2 | 2.0 JTS | |||
| Combustion chamber volume (c.c.) | Validity | |||
| 38.2 | 2.0 JTS | |||
| Cylinder head lower plane planarity (mm) | Validity | |||
| <0.1 | 2.4 JTD 20v | |||
| Cylinder head lower plane planarity (mm) | Validity |  | ||
| 0.1 | 2.0 JTS | |||
| Diameter of hydraulic tappet seats (mm) | Validity |  | ||
| 33.000 ÷ 33.025 | 2.0 JTS | |||
| Flatness of bottom surface (mm) | Validity | | ||
| 0.1 | 1.8 TS [d] 1.6 TS | |||
| Minimum permissible combustion chamber depth (mm) | Validity | | ||
| 12.8 ÷ 13.2 | 1.8 TS [d] 1.6 TS | |||
| Nominal lift (mm) | Validity |  | ||
| 107 ± 0.05 | 2.4 JTD 20v | |||
| Permissible minimum height (mm) | Validity | |||
| 107.0 ± 0.05 | 2.4 JTD 20v | |||
| Camshaft bearing diameter (mm) | Validity |  | ||
|---|---|---|---|---|
| 26.045 - 26.070 | 1.8 TS [d] | |||
| Cup seat diameter (mm) | Validity | |||
| 37.000 - 37.025 | 1.9 JTD 8v 2.4 JTD 10v | |||
| Diameter of hydraulic tappet seats (mm) | Validity | |||
| 33.000 - 33.025 | 1.8 TS [d] 1.6 TS | |||
| Flatness of bottom surface (mm) | Validity | |||
| 0.1 | 1.8 TS 1.9 JTD 8v [d] 1.6 TS | |||
| Flatness of bottom surface (mm) | Validity | |||
| 0.1 | 2.4 JTD 10v | |||
| Minimum permissible combustion chamber depth (mm) | Validity | |||
| 12.8 - 13.2 | 1.8 TS [d] 1.6 TS | |||
| Permissible minimum height (mm) | Validity | |||
| 141.00 ± 0.15 | 1.9 JTD 8v | |||
| Diameter (mm) | Validity | |||
|---|---|---|---|---|
| 26.045 - 26.070 | 1.9 JTD 8v | |||
| Diameter (mm) | Validity | |||
| 26.045 - 26.070 | 2.4 JTD 10v | |||
| Permissible minimum height (mm) | Validity | |||
| 140.85 ÷ 141.15 | 2.4 JTD 10v | |||
| Camshaft bearing diameter (mm) | Validity | | ||
|---|---|---|---|---|
| 27.010 - 27.036 | 2.5 V6 | |||
| Camshaft bearing diameter (mm) | Validity | |||
| 27.010 ÷ 27.036 | 3.2 V6 | |||
| Cylinder head lower plane planarity (mm) | Validity | | ||
| < 0.1 | 3.2 V6 | |||
| Diameter of hydraulic tappet seats (mm) | Validity | |||
| 33.000 - 33.025 | 2.5 V6 | |||
| Diameter of hydraulic tappet seats (mm) | Validity |  | ||
| 33.000 - 33.025 | 3.2 V6 | |||
| Flatness of bottom surface (mm) | Validity | |||
| 0.05 | 2.5 V6 | |||
| Flatness of bottom surface (mm) | Validity | | ||
| 0.1 | 2.5 V6 | |||
| Minimum permissible height after refacing (mm) | Validity | |||
| 134.85 - 135.15 | 2.5 V6 | |||
| Minimum permissible height after refacing (mm) | Validity | |||
| 134.85 ÷ 135.15 | 2.5 V6 | |||
| Minimum permitted cylinder head height (mm) | Validity | | ||
| 134.85 ÷ 135.15 | 3.2 V6 | |||
| Valve guide bore diameter (mm) | Validity | | ||
| 12.000 ÷ 12.018 | 3.2 V6 | |||