1008A44 REAR RIGID MOUNT - R R - Alfa - 156 - eLearn

3237446 - 1008A44 rear rigid mount - r r

) Position the vehicle on the ramp.Position a hydraulic jack under the manual gearbox differential.1. Undo the nut (1a) and bolt (1b) and remove the power unit rear rigid mount (1c).

1. Undo the nut fixing the rear power unit rigid support to the flexible mounting.2. Undo the bolts (2a) and remove the power unit rigid rear mounting (2b).

Refitting ( Removing

) 1. Refit the power unit rear rigid support (1a) in its seating and secure to the differential by tightening the bolts (1b) and (1c) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER UNIT RIGID REAR MOUNT	M12	(Gearbox side) 6.8 ÷ 8.3

	Fastening	Component	Ø	Value(daNm)
1c	Bolt	POWER UNIT RIGID REAR MOUNT	M16	(Gearbox side) 10.8 - 13.2

2. Tighten the nut securing the rear power unit rigid support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	-	-	-	-

1. Refit the gearbox side power unit rear rigid support reinforcement (1a) in its seating and secure by tightening the bolts (1b) and (1c) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD....	M10	(Crankcase side) 4.5 - 5.5

	Fastening	Component	Ø	Value(daNm)
1c	Nut	POWER UNIT RIGID REAR SUPPORT REINFORCEMENT ROD....	M12	(Flexible mounting side) 7.9 - 9.7

Remove the hydraulic jack from under the manual gearbox differential.Remove the car from the ramp.