1008B10 POWER UNIT FRONT MOUNT (TIMING SIDE) FLEXIBLE BLOCK - REPLACE - Alfa - 156 - eLearn

3237449 - 1008B10 power unit front mount (timing side) flexible block - replace

) Position the vehicle on the ramp.Raise the car.1. Position a hydraulic jack under the power unit timing side front support.2. Undo the bolt fixing the power unit timing side front support to the flexible mounting.3. Undo the bolts (3a) and remove the flexible mounting for the power unit timing side front support (3b).

Refitting ( Removing

) 1. Fit a new flexible mounting for the power unit timing side front support (1a) and fix it to the bodyshell tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT RUBBER MOUNTS	M6	2.7 - 3.4

2. Tighten the bolt fixing the power unit timing side front support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	ENGINE MOUNT TIMING SIDE	M12	4.2 - 5.1

3. Remove the hydraulic jack from under the power unit timing side front support. Lower the vehicle.Remove the vehicle from the ramp.