1076A32 EXHAUST RIGID MOUNT - R R - Alfa - 156 - eLearn

3237563 - 1076A32 exhaust rigid mount - r r

) Position the vehicle on the ramp.Raise the vehicle.1. Unscrew the bolts securing the front exhaust pipe section to the turbocharger.2. Undo the nuts (2a) and remove the reinforcement bracket (2b).3. Lower the front exhaust pipe section as necessary.

1. Undo the bolt securing the exhaust pipe rigid support to the collar.2. Position a hydraulic jack under the gearbox.3. Undo bolts (3a) and remove exhaust pipe rigid support (3b).

Refitting ( Removing

) Fit the rigid support for the exhaust pipe and fix it to the gearbox by tightening the bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	EXHAUST PIPE RIGID MOUNT	M12	7.5 - 9.2

Remove the hydraulic jack from under the gearbox.Tighten the bolt securing the exhaust pipe rigid support to the collar.Fit the reinforcement bracket and fix it using the nuts.Tighten the bolts securing the front section of the exhaust pipe to the turbocharger to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FLEXIBLE PIPE SECTION TO ENGINE	M8	2.0 - 2.5

Lower the vehicle.Remove the car from the ramp.