1060F10 FUEL INJECTORS - Alfa - 156 - eLearn

3237800 - 1060F10 fuel injectors

) - 5530B10 battery - r+r - 1060F36 lines to injectors - r rDisconnect the electrical connections from the injectors.

	Name	Connector
2C	Injector	N70

1. Manually push springs (1a) and disconnect the fuel return pipe for lubricating the injectors (1b) from the injectors2. Undo the nuts on the brackets securing the fuel injectors with their washers.

1. Remove the fuel injectors (1a) complete with fixing brackets (1b) with the tool (1c).

	Name	Country
-	Extractor	1.870.739.000

Remove the injector bracket support pads.

If the same injectors are being reused, mark the cylinder to which they belong so that they can be correctly refitted.

If new injector(s) is(are) being fitted, it is necessary to:

determine the identification code stamped on the top;
check that the new injectors(s) is (are) recognized by the engine management control unit using the Examiner.

Refitting ( Removing

) Refit the fuel injectors in their seatings.Refit the fuel injector brackets in their seatings and tighten the nuts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	INJECTORS(DIESEL)	M8	2.6 - 3.2

Position the connectors for the fuel return pipe for lubricating the injectors in the corresponding housings of the injectors and fully insert them until the click of the spring is heard.Connect the electrical connections to the injectors. - 1060F36 lines to injectors - r r - 5530B10 battery - r+r