1060G20 ENGINE RPM SENSOR - R.R. - Alfa - 156 - eLearn

3237812 - 1060G20 Engine RPM SENSOR - R.R.

) Position the vehicle on the lift.Raise the car. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

1. Disconnect the condensed oil return pipe from the sump.Disconnect the electrical connection for the engine rpm and timing sensor.

	Name	Connector
-	Rpm sensor	K46

2. Undo the bolts (2a) and remove the rpm and timing sensor (2b).

Refitting ( Removing

) Fit the engine rpm and timing sensor and fix it using the bolt to the cylinder block/crankcase.Connect the electrical connection for the engine rpm and timing sensor.Connect the oil return pipe to the engine sump.Connect the negative (-) battery terminal.Lower the vehicle.Remove the vehicle from the ramp.