3239022 - 7210A14 r r front bumper bracket

Removing ( Refitting )  - 7210A15  R.R. HEADLAMP HOUSING/FRONT WING CROSSMEMBER . Check if any of the connected parts are deformed by checking body alignment dimensions. Use appropriate measurement tools (reference rigs, templates or gauges).Straighten the body if necessary. Use a rotary brush to clean the areas in order to expose the weld spots.1. Drill out the weld points shown in the figure.2. Remove the wing brackets from the front beam. Use a grinding wheel to remove the weld spot residues on the body.1. Apply the electric weld paint finish. 1. Make equidistant holes as shown in the figure.Remove the corrosion-proofing from around the inner and outer edge of the part.2. Apply electroweldable paint finish to the edges in contact with the car. Refitting ( Removing ) 1. Fit the parts correctly using self-locking grippers. Ensure the dimensions shown in the figure are respected.2. Use a spot welder to weld the areas shown in the figure.3. Use a MIG welder to fill the holes made previously. 1. Use a grinding wheel to level weld residues and remove. 1. Apply rust-proofing to newly-welded areas.Apply paint.2. Apply wax.  - 7210A15  R.R. HEADLAMP HOUSING/FRONT WING CROSSMEMBER .