3238429 - 5530B10 battery - r+r
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	1. Remove the cover protecting the battery terminal (-).2. Disconnect the battery negative (-) terminal.3. Disconnect the battery negative (-) terminal.4. Undo nut (4a) securing battery retaining strap (4b).5. Remove the battery.
		)
	1. Remove the cover protecting the battery terminal (-).2. Disconnect the battery negative (-) terminal.3. Disconnect the battery negative (-) terminal.4. Undo nut (4a) securing battery retaining strap (4b).5. Remove the battery. |  | Name | Connector | 
|---|---|---|
| 5 | Battery | A1 | 

 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Fit the battery.Fit the battery belt and tighten the nut.Connect the negative (-) battery terminal.Connect the negative (-) battery terminal.Fit battery terminal (-) protective cover.
		)
	Fit the battery.Fit the battery belt and tighten the nut.Connect the negative (-) battery terminal.Connect the negative (-) battery terminal.Fit battery terminal (-) protective cover.
                            
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	Disconnect the battery negative terminal.1. Open the supply box protective cover.2. Release the clip and undo the box retaining bolts.3. Loosen the battery positive terminal nut.
		)
	Disconnect the battery negative terminal.1. Open the supply box protective cover.2. Release the clip and undo the box retaining bolts.3. Loosen the battery positive terminal nut.|  | Name | Connector | 
|---|---|---|
| 3 | Battery | A1 | 


 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Check that the battery is intact and shows
no signs of damage. Also check that the terminals are not contaminated
or oxidised.Position the battery in its seat.Fit the retaining strap and tighten the
nut.Position the supply box in its seat.Tighten the battery positive terminal nut.Tighten the retaining bolts and do up the
clip.Close the protective cover and connect
the battery negative terminal.Test the electrical system.
		)
	Check that the battery is intact and shows
no signs of damage. Also check that the terminals are not contaminated
or oxidised.Position the battery in its seat.Fit the retaining strap and tighten the
nut.Position the supply box in its seat.Tighten the battery positive terminal nut.Tighten the retaining bolts and do up the
clip.Close the protective cover and connect
the battery negative terminal.Test the electrical system.