5540A56 DIPPED/MAIN BEAM ELECTRICAL WIRING - CHECK COMPONENT OPERATION, LINE CONTINUITY AND REPAIR CONTACTS - INCLUDES RELAY REPLACEMENT IF NECESSARY - Alfa - 156 - eLearn

3238439 - 5540A56 dipped/main beam electrical wiring - check component operation, line continuity and repair contacts - includes relay replacement if necessary

) Open the boot lid and undo the two side bolts fixing the inner trim.

1. Undo the bolts and remove the light protection.2. Move the side trim.3. Disconnect the electrical connection.

	Name	Connector
3	Rear left light cluster	F30

	Name	Connector
3	Rear right light cluster	F31

4. Undo the nuts fixing the light.5. Remove the tail-light.

Refitting ( Removing

) Check that the light cluster is not damaged.Fit the rear light cluster fixing it using the nuts.Connect the electrical connectionCheck the operation of the rear lights.Refit the side trim.Fit the light protection, fixing it using the bolts.Tighten the two side trim bolts.Check the operation of the side lights, the direction indicators and the brake lights.