3239151 - 1060GA Check on operation of engine coolant temperature sensor

Make sure that the ignition is in the OFF position, then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ). Disconnect the electrical connection from the engine coolant temperature sensor.

NameConnector
-Engine temperature sender unit  K36 
Check that the nominal resistance of the engine coolant temperature sensor corresponds to the recommended value.
On post-modification versions a "twin NTC" type engine coolant temperature sensor is fitted. The nominal resistance is measured between pins B1 and B2.

MeasurementValue
-Nominal resistance (ohm)at +20°C2300 - 2600