3238741 - 7025B46 boot lid lock block - r+r

It is not possible to order a single lock block for each key or order lock blocks with the code change only.To order lock blocks follow the procedure shown in 5580E - Special Accessories.

Removing ( Refitting ) 1. Open the boot lid and unscrew the lining fastening screws. 1. Lower the lining (1a) and move the stop spring (1b).2. Insert the key in the lock block and remove it. Refitting ( Removing ) Check that the lock block is not damaged.Insert the stop spring in its seat.Insert the lock block in its seat and fasten its slot with the stop spring.Reposition and screw the lining.Check the function of the lock block and the correct operation of the lock control mechanism.