3238038 - 3310A57 front brake calliper bracket - r r
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	Position the vehicle on the
ramp - 4450B10  Front WHEEL (one) - R.R.1. Release the flexible brake caliper pipe from the mounting bracket.2. Remove the clip securing the brake caliper to the bracket.3. Remove the protective caps (3a), undo the bolts (3b) and move
the front brake caliper (3c) away from the bracket.4. Undo the bolts (4a) and remove the front brake caliper bracket
(4b).
		)
	Position the vehicle on the
ramp - 4450B10  Front WHEEL (one) - R.R.1. Release the flexible brake caliper pipe from the mounting bracket.2. Remove the clip securing the brake caliper to the bracket.3. Remove the protective caps (3a), undo the bolts (3b) and move
the front brake caliper (3c) away from the bracket.4. Undo the bolts (4a) and remove the front brake caliper bracket
(4b).
 Refitting
		(
		Removing
Refitting
		(
		Removing )
	Fit the front brake caliper
bracket and tighten the bolts to the specified torque.
		)
	Fit the front brake caliper
bracket and tighten the bolts to the specified torque.|  | Fastening | Component | Ø | Value(daNm) | 
|---|---|---|---|---|
| - | Bolt | FRONT BRAKE CALIPER BRACKET | M14 | 13.6 - 16.8 | 
|  | Fastening | Component | Ø | Value(daNm) | 
|---|---|---|---|---|
| - | Bolt | FRONT BRAKE CALIPER ASSEMBLY | M10 | 4.8 - 5.2 | 
 Removing
		(
		Refitting
Removing
		(
		Refitting )
	Position the vehicle on the rampEnsure that the ignition key is in the
OFF position, then disconnect the negative battery terminal (-).
		)
	Position the vehicle on the rampEnsure that the ignition key is in the
OFF position, then disconnect the negative battery terminal (-).
  |  | Name | Connector | 
|---|---|---|
| - | Battery | A1B | 

 Refitting
		(
		Removing
Refitting
		(
		Removing )
	1. Place the front brake caliper bracket (1a) back in its housing
and fix it tightening the bolts (1b) to the recommended torque.
		)
	1. Place the front brake caliper bracket (1a) back in its housing
and fix it tightening the bolts (1b) to the recommended torque.|  | Fastening | Component | Ø | Value(daNm) | 
|---|---|---|---|---|
| 1b | Bolt | FRONT BRAKE CALIPER BRACKET | M12 | (Front steering knuckle side) 11.1 ÷ 12.3 | 
