3238410 - 5520A14 ignition key block - r+r

It is not possible to order one single key block or order blocks with the only spare code.To order blocks, keep to the correct procedure shown in 5580E - Special accessories.

Removing ( Refitting ) 1. Unloose fixing screws (1a) and remove steering column guard (1b). Insert ignition key in its block and turn it in "running" position.1. Press (by a screwdiver) on stop tooth (1a) and withdraw control block (1b) from ignition switch. 1. Remove stop ring placed in the rear side of switch control block. 1. Press lever (1a) connection parking lights and turn the key to make pin (1b) place in proper slit. 1. Partially withdraw key from block to make block (1a) lower, pass through proper slit and withdraw key block (1b). Refitting ( Removing ) 1. Insert key in block up to bottom slide. Partially withdraw key from block to make block (1a) lower and insert block with key in the proper seat (1b). Mount elastic stop ring on ignition key block rear side.Mount key block in ignition switch.Test block functionality.Mount steering column guard.