A06 ALARM LIGHT FLASHING NOT WORKING - Alfa - 156 - eLearn

When the alarm is operated the direction indicators do not flash

1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	WARNING: the flashing of the direction indicators may or may not be activated, according to the various country modes ( see DESCRIPTION AND OPERATION: 5580E anti-theft device ). Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket Check, in order: no faults in the alarm control unit no faults in the alarm receiver	Continue to Step 2	Error detected in the control unit or receiver	Continue according to the instructions for the diagnostic equipment
		Continue to Step 2	Dialogue failure for diagnostic equipment between the control unit and the receiver	Restore the connection between the control unit and the diagnostic connector ( See E7015 ALARM ).
2	ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	With the diagnostic equipment (Examiner or other instruments) carry out the active diagnosis of the operation of the direction indicators	Continue to Step 3	Lights not activated	Restore connections between alarm control unit and lights ( See E2020 DIRECTION INDICATORS / HAZARD WARNING LIGHTS ).
3	CHECK CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'