3237905 - 1820B54 hose from damper - r r

Removing ( Refitting ) Position the vehicle on the ramp Proceed with removal  - 1016A10  sound-proofing cover - r + r Proceed with removal  - 5530B10  battery - r+r Proceed with removal - 5530B54 battery cover - r+r Proceed with removal  - 7055B54  under-engine guard - r r1. Remove the cap on the bleed valve.2. Connect the collection system (pipe and reservoir) to the bleed valve on the hydraulic clutch actuator. 3. Lift the retaining clip (3a) and withdraw the bleed device (3b) as much as necessary.Let the hydraulic clutch system drain completely.4. Raise retaining clip (4a) and disconnect the hose from the vibration damper to the slave cylinder (4b), clutch hydraulic actuator side. 1. Remove the retaining clip (1a) and disconnect the pipe between the vibration damper and the slave (1b), vibration damper side.2. Remove the flexible pipe from the vibration damper to the slave cylinder after having released it from its fastenings. Refitting ( Removing ) Place the flexible pipe from the vibration damper to the slave cylinder back in its housing and secure it.Connect the flexible pipe from the vibration damper to the slave cylinder, vibration damper side and secure it using the retaining clip.Connect the flexible pipe from vibration damper to slave cylinder, clutch hydraulic actuator side and secure with the retaining clip. Proceed with refitting - 0010T64 brake and or clutch fluid check level and top up as necessary Proceed with refitting  - 0010T67  hydraulic clutch system bleed air Proceed with refitting  - 7055B54  under-engine guard - r r Proceed with refitting - 5530B54 battery cover - r+r Proceed with refitting  - 5530B10  battery - r+r Proceed with refitting  - 1016A10  sound-proofing cover - r + rRemove the car from the ramps.