4130B72 RETURN PIPE FROM POWER ASSISTED STEERING BOX TO INTERMEDIATE PIPE - R.R. - Alfa - 156 - eLearn

3238147 - 4130B72 Return PIPE from POWER ASSISTED STEERING BOX to INTERMEDIATE PIPE - R.R.

) Position the vehicle on the rampDrain the power steering fluid from the reservoir using a suitable syringe. Proceed with removal - 1016A10 sound-proofing cover - r + r . Proceed with removal - 5530B10 battery - r+r . Proceed with removal - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . Proceed with removal - 4450B02 left front wheel r r . Proceed with removal - 7055B90 Left front WHEEL ARCH LINER - R.R. . Proceed with removal - 7055B54 under-engine guard - r r . Proceed with removal - 1048B14 air delivery pipe between turbo charger and heat exchanger - replace . Proceed with removal - 1008A42 gear box left rigid mount - r r . Proceed with removal - 1008B30 gearbox side mount flexible block - replace . Proceed with removal - 1076B70 exhaust pipe between pre-catalytic converter and catalytic converter - r r . 1. Undo the connector (1a) and disconnect the rubber return pipe from the power assisted steering box to the rigid pipe (1b), power assisted steering box side.2. Looen the band and disconnect the rubber return pipe from the power assisted steering box to the rigid pipe and remove it.

Refitting ( Removing

) Place the rubber return pipe from the power assisted steering box to the rigid pipe back in its housing, connect it to the rigid pipe and tighten the band.1. Connect the rubber return pipe from power steering box to rigid pipe (1a) power steering box side and secure by tightening fitting (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Connector	POWER STEERING/EXCHANGE BOX RUBBER HOSE	M12	(Power steering box side) 2.7 ÷ 3.3

Proceed with refitting - 1076B70 exhaust pipe between pre-catalytic converter and catalytic converter - r r . Proceed with refitting - 1008B30 gearbox side mount flexible block - replace . Proceed with refitting - 1008A42 gear box left rigid mount - r r . Proceed with refitting - 1048B14 air delivery pipe between turbo charger and heat exchanger - replace . Proceed with refitting - 7055B54 under-engine guard - r r . Proceed with refitting - 7055B90 Left front WHEEL ARCH LINER - R.R. . Proceed with refitting - 4450B02 left front wheel r r . Proceed with refitting - 5530B52 Battery DRIP TRAY/SUPPORT - R.R. . Proceed with refitting - 5530B10 battery - r+r . Proceed with refitting - 1016A10 sound-proofing cover - r + r . Fill the power steering circuit with the recommended fluid.

	Type	Component	Name	Qty.
-	Fluid	HYDRAULIC POWER ASSISTED STEERING SYSTEM	TUTELA GI/A	1.3

Fluid for Northern European countries: TUTELA CAR GI/E - ATF DEXRON III.

Bleed the power steering system as described belowWith the front wheels raised off the ground, with the engine switched off turn the steering wheel to full lock, left and right, 4-5 times. Check and, if necessary, top up the fluid level in the reservoir. Remove the car from the ramps.Start the engine and carry out 4 - 5 full steering wheel turn cycles (right and left). Top up the fluid level in the reservoir.