3237444 - 1008A42 gear box left rigid mount - r r

Removing ( Refitting ) Position the vehicle on the ramp. Proceed with removal  - 4450B02  left front wheel r r . Proceed with removal - 7055B90 Left front WHEEL ARCH LINER - R.R. . Proceed with removal  - 7055B54  under-engine guard - r r . Proceed with removal  - 1048B14  air delivery pipe between turbo charger and heat exchanger - replace . 1. Undo bolt (1a) and disconnect battery earth lead (1b) from the power unit gearbox end rigid mount.

	Name	Connector
1b	Battery earth	C1

Position a hydraulic jack under the gearbox.2. Undo the bolts (2a) and remove the reinforcement (2b).3. Undo the bolts fixing the power unit gearbox side rigid support to the flexible mounting. 4. Undo the bolts (4) and remove the power unit gearbox side rigid engine mount (4). Refitting ( Removing ) 1. Refit the gearbox side power unit rigid support (1a) in its seating and tighten the bolts (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M10	(Manual gearbox/differential side) 4.2 ÷ 5.2

2. Undo the bolt fixing the gearbox side rigid power unit support to the flexbile block to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2	-	-	-	-

3. Place the reinforcement (3a) in its seating and tighten the bolts (3b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
3b	Bolt	GEARBOX SIDE FLEXIBLE MOUNTING	M8	(Gearbox side) 2.3 ÷ 2.8

	Fastening	Component	Ø	Value(daNm)
3b	Bolt	GEARBOX SIDE FLEXIBLE MOUNTING	M10	(Rigid support side) 6.2 ÷ 7.6

Remove the hydraulic jack from under the gearbox.4. Connect the battery earth lead to the gearbox side rigid power unit support and fix it using the bolt. Proceed with refitting  - 1048B14  air delivery pipe between turbo charger and heat exchanger - replace . Proceed with refitting  - 7055B54  under-engine guard - r r . Proceed with refitting - 7055B90 Left front WHEEL ARCH LINER - R.R. . Proceed with refitting  - 4450B02  left front wheel r r . Remove the car from the ramps.