1008A44 REAR RIGID MOUNT - R R - Alfa - 156 - eLearn

3237446 - 1008A44 rear rigid mount - r r

) Position the vehicle on the ramp. Proceed with removal - 7055B54 under-engine guard - r r . Proceed with removal - 1076B70 exhaust pipe between pre-catalytic converter and catalytic converter - r r . 1. Position a hydraulic jack under the gearbox.2. Undo the bolt fixing the rear power unit rigid support to the flexible mounting. 3. Undo the bolts (3a) and remove the rear support for the power unit (3b).

Refitting ( Removing

) 1. Refit the gearbox side power unit rear rigid support (1a) in its seating and tighten the bolts (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	POWER UNIT RIGID REAR MOUNT	M12	(Manual gearbox/differential side) 7.7 ÷ 9.4

2. Tighten the bolt securing the rigid rear power unit support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	-	-	-	-

3. Remove the hydraulic jack from under the gearbox.

Proceed with refitting - 1076B70 exhaust pipe between pre-catalytic converter and catalytic converter - r r . Proceed with refitting - 7055B54 under-engine guard - r r . Remove the car from the ramps.