3237498 - 1032D12 timing system protective cover(s) - r + r

1. Undo the bolts (1a) and remove the lower protective timing cover (1b).
Lower the vehicle.1. Undo the bolts (1a) and remove the upper timing gear cover (1b) complete with single drive belt (1c).2. Undo the bolts (2a) and remove the timing gear side guards (2b).
Fit the timing gear side guards and fix them using the bolts.Fit the upper timing gear cover complete with single drive belt and fix it using the bolts.Raise the car.Fit the lower protective timing cover and fix it using the bolts. Removing ( Refitting ) Position the vehicle on the ramp. Proceed with removal  - 4450B04  right front wheel r r . Proceed with removal  - 7055B54  under-engine guard - r r . Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R. . Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R. . Proceed with removal  - 1092G10  single engine belt r r . Proceed with removal  - 1092A10  Crankshaft services PULLEY - R.R. . Proceed with removal  - 1092G21  engine component single belt fixed tensioner - r rwith belt removed . Proceed with removal  - 1016A10  sound-proofing cover - r + r . Proceed with removal  - 1008C10  power unit upper reaction link r r . Position a hydraulic jack under the gearbox.1. Undo the bolts fixing the power unit gearbox side rigid support to the flexible mounting.Lower the hydraulic jack slowly until the drive shaft joint is resting ont he front suspension beam.Remove the hydraulic jack from under the gearbox.
1. Undo the bolts (1a) and remove the upper protective intake side timing cover (1b).2. Undo the bolts (2a) and remove the upper protective exhaust side timing cover (2b).3. Undo the bolts (3a) and remove the lower timing cover (3b).
Refitting ( Removing ) Fit the lower protective timing cover and secure using the bolts.Fit the upper protective timing gear cover, exhaust side, and fix it using the bolts.Fit the upper protective timing gear cover, intake side, and fix it using the bolts.Position a hydraulic jack under the gearbox.Using the hydraulic jack, place the gearbox side rigid support in contact with the flexible mounting.1. Undo the bolt fixing the gearbox side rigid power unit support to the flexbile block to the specified torque.

FasteningComponentØValue(daNm)
1----
Remove the hydraulic jack from under the gearbox.
Proceed with refitting  - 1008C10  power unit upper reaction link r r . Proceed with refitting  - 1016A10  sound-proofing cover - r + r . Proceed with refitting  - 1092G21  engine component single belt fixed tensioner - r rwith belt removed . Proceed with refitting  - 1092A10  Crankshaft services PULLEY - R.R. . Proceed with refitting  - 1092G10  single engine belt r r . Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R. . Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R. . Proceed with refitting  - 7055B54  under-engine guard - r r . Proceed with refitting  - 4450B04  right front wheel r r . Remove the car from the ramps.