3237571 - 1076B34 front catalytic converter attachment seal - replace
Removing
(
Refitting
)
Position the vehicle on the ramp.
Proceed with removal
- 7055B54 under-engine guard -
r r
.
1. Undo the nuts (1a) and disconnect the exhaust pipe between precatalyzer
and catalytic converter (1b), catalytic converter side together
with the locking bracket on the flexible supports (1b). 2. Remove the front attachment gasket for the catalytic converter.
Refitting
(
Removing
)
1. Place the front catalytic converter attachment gasket in the
housing. 2. Refit the exhaust pipe in its seating between the precatalyzer
and the catalytic converter (2a), catalytic converter side, and
the locking bracket on the flexible supports (2b), then tighten
the nuts (2c) to the specified torque.  | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| 2c | Nut | PRE-CAT CONVERTOR/CAT CONVERTOR PIPE | M8 | (Catalytic converter side) 2.3 ÷ 2.8 |
