1092G10 SINGLE ENGINE BELT R R - Alfa - 156 - eLearn

3237644 - 1092G10 single engine belt r r

) Position the vehicle on the ramp. Proceed with removal - 4450B04 right front wheel r r . Proceed with removal - 7055B54 under-engine guard - r r . Proceed with removal - 7055B91 Right front WHEEL ARCH LINER - R.R. . Proceed with removal - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R. . 1. Use the tool (1a) on the moving tensioner (1b), then insert the tool (1c) in the opening in the moving tensioner.

	Name	Country
1a	Key	1.860.966.000

	Name	Country
1c	Clip	1.870.645.000

2. Remove the protective plug for the single drive belt cam tensioner.3. Loosen the engine component single drive belt tensioner fixing bolts.4. Remove the engine components single drive belt.

Refitting ( Removing

) Fit the single drive belt.

Do not allow oil or solvents to come into contact with the belt, as these could affect the flexibility of the rubber, resulting in reduced grip. Also check that there are no cracks or cuts on the belt, otherwise it will have to be replaced.

1. Rotate the single drive belt cam tensioner (1a) using the tool (1b) until the tool (1c) comes out easily, then tighten cam tensioner fixing bolt (1d) to the recommended torque.

	Name	Country
1b	Key	1.860.968.000

	Name	Country
1c	Clip	1.870.645.000

	Fastening	Component	Ø	Value(daNm)
1d	Bolt	VARIOUS S D BELT CAM TENSIONER	M10	4.5 ÷ 5.5

Proceed with refitting - 7055B66 Engine compartment DUST SHIELD protection in right front wheel arch - R.R. . Proceed with refitting - 7055B91 Right front WHEEL ARCH LINER - R.R. . Proceed with refitting - 7055B54 under-engine guard - r r . Proceed with refitting - 4450B04 right front wheel r r . Remove the car from the ramps.