3237818 - 1060G50 Electro-pneumatically controlled THROTTLE CASING - R.R.

Removing ( Refitting ) Proceed with removal  - 1016A10  sound-proofing cover - r + r . 1. Loosen the band and disconnect the air intake hose to the throttle casing.2. Disconnect the vacuum pipe from the pneumatic valve on the throttle body.3. Undo bolts (3a) and remove the pneumatic throttle body (2b).
Refitting ( Removing ) 1. Replace the pneumatically-controlled throttle casing (1a) back in its housing and fix it tightening the bolts (1b) to the recommended torque.

FasteningComponentØValue(daNm)
1b----
2. Connect the vacuum pipe to the pneumatic valve on the throttle body.3. Connect the air inlet hose to the throttle casing and tighten the band.
Proceed with refitting  - 1016A10  sound-proofing cover - r + r .