3238452 - 5540B44 dipped beam for one gas discharge lighting unit one lh or rh r r

Refitting ( Removing ) Check the condition and the cleanliness of the lamp.
do not touch the bulb with your hands; if this does happen, clean the bulb with alcohol.
1. Place the bulb (1a) in the housing, inserting the seats (1b) and (1b) on the teeth (1d) and (1e), respectively.2. Place the ring nut (2a) in position, with the word TOP (2b) upwards and also ensure that the housings (2c) are aligned with the bulb pins (2d); lastly, rotate the ring nut in the housing.3. Fit the bulb holder and rotate it into position (bayonet fitting).4. Place the cover in position.5. Tighten the bolts.
For the left headlamp only. Position the protection and fix it using the bolts.Check that the front headlamps are working properly.