125001010 - 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE

Removing ( Refitting ) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).
NameConnector
-Battery See A1B BATTERY ( BATTERY NEGATIVE )
Proceed with removal- 1016A10 sound-proofing cover - r + r Proceed with removal1. Disconnect the quick-release connector for the front fuel supply pipe, fuel filter side.    Op. 7055B54 UNDER-ENGINE GUARD - R R2. Disconnect the rapid attachment on the fuel return pipe to the fuel return manifold pipe, fuel filter side.3. Disconnect the quick-release connector for the fuel supply pipe to the pressure pump, fuel filter side.4. Disconnect the electrical connection from the fuel temperature sensor.5. Disconnect the electrical connection from the fuel pre-heating device.
Recover the fuel which comes out in a suitable container.
NameConnector
4Fuel heating resistance and temperature sensor See K100A FUEL HEATING RESISTANCE AND TEMPERATURE SENSOR ( CONNECTORS )
NameConnector
5Fuel heating resistance and temperature sensor See K100B FUEL HEATING RESISTANCE AND TEMPERATURE SENSOR ( CONNECTORS )
1. Undo the nuts (1a), raise the fuel filter sufficiently to disconnect the electrical connection from the water presence sensor in the fuel filter (1b).
NameConnector
1bWater in diesel filter sensor See K31 WATER IN DIESEL FILTER SENSOR
2. Remove the fuel filter.
Refitting ( Removing ) Connect the electrical connection to the water-in-fuel filter sensor, then refit the complete fuel filter in its seating and secure with its nuts.Connect the electrical connection to the fuel pre-heating device.Connect the electrical connection to the fuel temperature sensor.Connect the quick-release connector for the fuel supply pipe to the pressure pump, fuel filter side.Connect the rapid attachment of the fuel return pipe to the fuel return manifold pipe, fuel filter side.Connect the quick-release connector for the front fuel supply pipe, fuel filter side.Proceed with refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with refitting- 1016A10 sound-proofing cover - r + r .Connect the negative (-) battery terminalRemove the car from the ramps.