1060G20 RPM AND TIMING SENSOR - R R - Alfa - GT - eLearn

125001050 - 1060G20 RPM AND TIMING SENSOR - R R

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R R1. Disconnect the electrical connection for the rpm sensor.2. Undo the bolt (2a) and remove the engine rpm sensor (2b).

	Name	Connector
1	Rpm sensor	See K46 RPM SENSOR ( CONNECTORS )

Refitting ( Removing

) Place the engine rpm sensor back in its housing and fix it using the bolt.Connect the electrical connection for the rpm sensor.Proceed with refitting Op. 7055B54 UNDER-ENGINE GUARD - R R.Connect the negative (-) battery terminalRemove the car from the ramps.