1060G22 CAM ANGLE SENSOR - R R - Alfa - GT - eLearn

125001051 - 1060G22 CAM ANGLE SENSOR - R R

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with removal- 1016A10 sound-proofing cover - r + r 1. Disconnect the electrical connection from the cam angle sensor.2. Undo the bolt (2a) and remove the cam angle sensor (2b).

	Name	Connector
1	Timing sensor.	See K47 TIMING SENSOR. ( CONNECTORS )

Refitting ( Removing

) 1. Plact the cam angle sensor (1a) back in its housing and secure it tightening the bolt (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	CAM ANGLE SENSOR	M6	(Cylinder head side 08 10

2. Connect the electrical connection to the cam angle sensor.

Proceed with refitting- 1016A10 sound-proofing cover - r + r .Connect the negative (-) battery terminal