125001060 - 1060G70 VACUM TANK FOR CONTROLLING ENGINE AIR INTAKE R R

Removing ( Refitting ) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with removal- 1016A10 sound-proofing cover - r + r Proceed with removalProceed with removal    Op. 7055B54 UNDER-ENGINE GUARD - R RProceed with removal1. At the bench, undo the nuts (1a) and remove the vacuum reservoir (1b) complete with solenoid valve (1c) and pipes from the mounting bracket.    Op. 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE    Op. 1080D34 ENGINE OIL VAPOUR SEPARATOR - R + R Refitting ( Removing ) Place the vacuum reservoir mounting bracket complete with solenoid valve and pipes back in its housing and secure it using the nuts.Proceed with refitting    Op. 1080D34 ENGINE OIL VAPOUR SEPARATOR - R + R.Proceed with refitting    Op. 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE.Proceed with refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with refitting- 1016A10 sound-proofing cover - r + r .Connect the negative (-) battery terminalRemove the car from the ramps.