2710A32 INTERMEDIATE DRIVE SHAFT BEARING SUPPORT - R + R WITH INTERMEDIATE DRIVE SHAFT REMOVED - Alfa - GT - eLearn

125001304 - 2710A32 INTERMEDIATE DRIVE SHAFT BEARING SUPPORT - R + R WITH INTERMEDIATE DRIVE SHAFT REMOVED

) Position the vehicle on a lift.Proceed with the removal - 1016A10 SOUND INSULATION COVER - R.R. .Proceed with the removal Op. 1084A16 OIL DIP STICK PIPE - R R.Proceed with the removal Op. 1092G10 SINGLE ENGINE BELT R R.1. Disconnect the electrical connections from the alternator.

	Description	Connector
1	Alternator	See A10 ALTERNATOR

2. Undo the nuts for the alternator fixing bolts and partly remove the bolts releasing them from the alternator rear mounting and the intermediate driveshaft bearing support.

1. Undo the bolts (1a) and remove the alternator rear mounting bracket (1b).

1. Undo the bolt connecting the intermediate driveshaft bearing support to the crankcase sump.2. Undo the bolts (2a) and remove the intermediate driveshaft bearing support (2b).

Refitting ( Removing

) 1. Place the intermediate driveshaft bearing support (1a) in its housing and secure it to the crankcase tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT DRIVE SHAFT BEARING MOUNT	M10	(Engine crankcase side) 4.5 - 5.5

2. Tighten the bolt connecting the intermediate driveshaft bearing support to the crankcase sump.

Place the alternator rear mounting bracket in its housing and secure it using the bolts.Tighten the alternator fixing bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ALTERNATOR ASSEMBLY	M10	4.5 ÷ 5.5

	Fastening	Component	Ø	Value(daNm)
-	Bolt	ALTERNATOR ASSEMBLY	M12	6.3 ÷ 7.7

Connect the electrical connections to the alternator.Proceed with the refitting Op. 1092G10 SINGLE ENGINE BELT R R.Proceed with the refitting Op. 1084A16 OIL DIP STICK PIPE - R R.Proceed with the refitting - 1016A10 SOUND INSULATION COVER - R.R. .Remove the vehicle from the lift.