The graphic index and the description of the symbols appearing in the repair procedures are given below.
Symbols
.
1 - Cut with hack-sawing machine2 - Cut with circular saw3 - Clean with rotary brush4- Remove spot welds with spot weld remover5 - Remove spot welds with spot weld remover Drilling for MIG welding6 - Prepare panel using chisel Drilling for MIG welding7 - Application of electro-weldable protectives8 - Apply high-thickness electroweldable protective coating9 - Locate components10 - Measure11 - Secure components12 - Secure threaded rivets13 - Check openings are aligned14 - Straighten edges using a profiled stake and hammer15 - Remove weld spots with chisel and hammer16 - Remove treatment with pneumatic knife17 - Spot welding18 - MIG welding19 - Welding with oxyacetylene torch20 - Grinding21 - Apply rustproofings22 - Apply sealants23 - Apply underbody protective coatings24 - Apply paints25 - Apply wax-based protection26 - Apply foam products27 - Heating with hot air28 - Removing panel offcuts
Processing symbols
The symbols are given below of the work tasks which are described in the repair procedures with an example of application. In the descriptions of the procedures, beside the progressive number of the steps of the procedure relating to welding tasks, there may be numbers in brackets which indicate the number of spot welds to be made or to be filled by MIG welding.Cut made by hack saw or pneumatic chisel
