125000470 - C05 AUTOMATIC-MANUAL SHIFT

The vehicle switches to manual by itself when driving in automatic

It should be remembered that operating strategies make provision to implement a gear change suggestion via the lever/buttons on the steering wheel and it remains in City mode

		Results of the tests
0	CONTROL UNIT ERRORS CHECK	All OK	Problems met	Operation
	Check that there are no control unit errors. In particular: No accelerator pedal information error	Continue to Step 2	Presence of error signalled	Continue to Step 1
1	CHECKS ON FAULTS DETECTED	All OK	Problems met	Operation
	Check the faults according to See Test    See Test 2127I What to do for error in Selespeed control unit	End of diagnosis	Faulty connections	Repair/replace the wiring
2	CITY BUTTON CHECK	All OK	Problems met	Operation
	Check that the City button is working properly (no false contacts) following See Test    See Test 2127H CHECK ON AUTO BUTTON AUTOMATIC OPERATION SELECTION	Continue to Step 3	There is no change of state and/or the ''CITY'' button is not displayed	Check the switch and the wiring Repair/replace the part that is not working
3	CHECK FOR LEVER/BUTTON FALSE CONTACTS AT THE STEERING WHEEL	All OK	Problems met	Operation
	With the vehicle in CITY mode, road test it over an unmade road to check for the presence of false contacts at the lever	Continue to Step 4	There are spontaneous shifts from City to manual	Check the wiring and the switches/gear lever Repair/replace the part that is not working
4	AFTER THE CHECK ON THE CORRECT OPERATION OF THE GEAR LEVER	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	The fault persists	Contact Technical Service for further information on the problem