125000551 - I60 FLASHING, SWITCHING OFF OR VARIATION IN DIPPED HEADLAMPS BRIGHTNESS

Flashing, switching off or irregular variation in the brightness of the dipped headlamp in one or both of the light clusters Warning: Presence of high voltage (25kV) at the gas discharge bulb connector during the first 0.7 secs after the dipped headlamps have been turned on. Do not switch on the dipped headlamps when the discharge bulb connector is not correctly connected. Do not disconnect the discharge bulb connector with the dipped headlamps switched on. Handle the discharge bulb with clean, cloth gloves and never touch the glass bulb with your fingers. Do not reverse the polarity of the lamp supply lines or else the control unit will be irreversably damaged.

		Results of the tests
1	10-WAY CONNECTOR CHECK	All OK	Problems met	Operation
	Check that the 10-way connector is correctly inserted at the headlamp cable bridges See    See E2011 DIPPED HEADLAMPS	Continue to Step 2	Connectors not properly fitted	Restore the correct connection See    See E2011 DIPPED HEADLAMPS
2	SUPPLY FUSE OPERATION CHECK	All OK	Problems met	Operation
	Check the headlamp supply fuse contacts (15 A) See    See E2011 DIPPED HEADLAMPS	Continue to Step 3	Fuse contact loose	Restore fuse operation
3	WIRING CHECK	All OK	Problems met	Operation
	Check that there are no breaks in the wiring between the battery and the 10-way connector for the headlamp See Test    See Test 5540A LIGHTING	End of diagnosis	Break in the wiring	Renew the wiring See    See E2011 DIPPED HEADLAMPS
			Connector damaged	Replace the connector
			Control unit fault	Replace control unit Op.    Op. 5540B43 CONTROL UNIT OF ONE RIGHT GAS DISCHARGE LIGHT CLUSTER ONE LH OR RH RR WITH LIGHT CLUSTER REMOVED
4	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	The fault persists	Replace the Body Computer Op.    Op. 5505A32 BODY COMPUTER - R R