K06 TRIP METER DOES NOT ZERO - Alfa - GT - eLearn

With the ignition ON, the milometer cannot be zeroed using the button.

1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	Connect the Examiner to the diagnostic socket.Check that there are no faults in the instrument panel	Continue to Step 2	There are errors	Proceed in accordance with the instructions given by the diagnostic equipment
2	ELECTRICAL CIRCUIT CHECK	All OK	Problems met	Operation
	Check: Connections between left control panel and instrument panel Connections between left control panel and earth Left control panel earth See See E4010 INSTRUMENT PANEL	Continue to Step 3	Connections defective, earth defective	Restore the correct connections, if necessary, replace the wiring See See E4010 INSTRUMENT PANEL
3	LEFT CONTROL PANEL CHECK	All OK	Problems met	Operation
	Check that the left control panel is working properly See See E4010 INSTRUMENT PANEL	Continue to Step 4	Left control panel defective	Replace the left control panel Op. Op. 5560B56 PANEL WITH MULTIFUNCTION DISPLAY AND HEADLAMP ALIGNMENT SWITCHES BUTTONS R R
4	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	.