125000575 - K09 DOORS OPEN CHECK WARNING LIGHT ON

The door open symbol in the Instrument Panel Node matrix remains on.

		Results of the tests
0	PRELIMINARY CHECKS	All OK	Problems met	Operation
	Check that the two doors and the boot are properly shut	Continue to Step 1	Doors not properly closed	Make sure they are properly closed. If the fault persists.Continue to Step 1
1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Using the Examiner check, in the Instrument Panel Node ambient, that there are no errors and the following parameters are present.	Continue to Step 5	Impossible to connect with the Instrument Panel control unit	Continue to Step 2
			There are errors	Continue in accordance with the instructions for the diagnostic equipment
2	ELECTRIC POWER SUPPLY CHECK	All OK	Problems met	Operation
	Check that the Instrument Panel Node electrical power supply is correct	Continue to Step 3	Positive and/or earth electrical power supply faulty	Replace the component involved (if a fuse is involved, search for the cause of the problem)
3	CHECK ELECTRICAL CONNECTIONS	All OK	Problems met	Operation
	Check the electrical connections between the Body Computer and the Instrument Panel, in particular that each individual pin is correctly connected.	Continue to Step 4	Electrical connections not working	Restore damaged electrical connections.
4	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Using the Examiner, check the possibility of connecting with the Instrument Panel Node	Continue to Step 5	Impossible to connect with the Instrument Panel	Replace the instrument panel Op.    Op. 5560B11 ANALOGUE CONTROL PANEL - R+R OR REPLACE
5	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Using the Examiner, check, in the Body Computer Node ambient, that there are no errors and the door status parameter varies	Continue to Step 1	Impossible to connect with the Body Computer control unit	Continue to Step 6
			There are errors	Continue in accordance with the instructions for the diagnostic equipment
			The parameter values do not change	Continue to Step 9
6	ELECTRIC POWER SUPPLY CHECK	All OK	Problems met	Operation
	Check that the Body Computer Node electrical power supply is correct	Continue to Step 7	Positive and/or earth electrical power supply faulty	Replace the component involved (if a fuse is involved, search for the cause of the problem)
7	CHECK ON CONNECTIONS	All OK	Problems met	Operation
	Check the continuity of the wiring between the door lock geared motors and the Body Computer Node and between the boot opening switch and the Body Computer Node	Continue to Step 8	Door electrical connections not working	Restore damaged electrical connections See    See E3040 CENTRAL LOCKING
			Boot electrical connections not working	Restore damaged electrical connections See    See E3045 BOOT AND FUEL FLAP OPENING
8	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Using the Examiner, check the possibility of connecting with the Body Computer Node	Continue to Step 5	Impossible to connect with the Body Computer control unit	Replace the Body Computer Node Op.    Op. 5505A32 BODY COMPUTER - R R
9	CHECK ON CONNECTIONS	All OK	Problems met	Operation
	Check the continuity of the wiring between the door lock geared motors and the Body Computer Node and between the boot opening switch and the Body Computer Node	Continue to Step 10	Door electrical connections not working	Restore damaged electrical connections See    See E3040 CENTRAL LOCKING
			Boot electrical connections not working	Restore damaged electrical connections. See    See E3045 BOOT AND FUEL FLAP OPENING
10	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	The fault persists	Continue to Step 1