125000680 - S05 ENGINE HISSING

There is buzzing (low frequency noise) coming from the engine, whose intensity varies with the number of revs
Results of the tests
1INTAKE AIR CIRCUIT CHECKAll OKProblems metOperation
Check the condition and seal of the air supply circuitContinue to Step 2Circuit component damagedReplace the component
2CHECKING ENGINE EXHAUSTAll OKProblems metOperation
1.9 JTD 16V

Check the engine exhaust system and, in particular:

  • Manifold
  • Pipe
  • Exhaust silencer
Continue to Step 3Pipe damagedReplace the pipe Op. 1076B12
Intermediate silencer damagedReplace the intermediate silencer Op.    Op. 1076B26 INTERMEDIATE EXHAUST SILENCER - R+R EMISSION CONTROL VERSIONS
Rear silencer damagedReplace the rear silencer Op.    Op. 1076B22 REAR EXHAUST SILENCER - R+R EMISSION CONTROL VERSIONS
2.0 JTS

Check the engine exhaust system and, in particular:

  • Manifold
  • Pipe
  • Exhaust silencer
  • Catalytic converter front gasket
Continue to Step 3Pipe damagedReplace the pipe Op. 1076B12
Front silencer damagedReplace the front silencer Op.    Op. 1076B30 FRONT EXHAUST SILENCER - R + R
Intermediate silencer damagedReplace the intermediate silencer Op.    Op. 1076B26 INTERMEDIATE EXHAUST SILENCER - R+R EMISSION CONTROL VERSIONS
Rear silencer damagedReplace the rear silencer Op.    Op. 1076B22 REAR EXHAUST SILENCER - R+R EMISSION CONTROL VERSIONS
Front gasket worn or damagedReplace the front gasket Op.    Op. 1076B34 FRONT CATALYTIC CONVERTER ATTACHMENT SEAL - REPLACE
3.2 V6

Check the engine exhaust system and, in particular:

  • Manifold
  • Pipe
  • Exhaust silencer
  • Catalytic converter front gasket
Continue to Step 3Pipe damagedReplace the pipe Op. 1076B12
Intermediate silencer damagedReplace the intermediate silencer Op.    Op. 1076B26 INTERMEDIATE EXHAUST SILENCER - R+R EMISSION CONTROL VERSIONS
Rear silencer damagedReplace the rear silencer Op.    Op. 1076B22 REAR EXHAUST SILENCER - R+R EMISSION CONTROL VERSIONS
Front gasket worn or damagedReplace the front gasket Op.    Op. 1076B34 FRONT CATALYTIC CONVERTER ATTACHMENT SEAL - REPLACE
3CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosis.