125000690 - S25 CLUTCH NOISY

When the clutch pedal is operated there is a noise (creaking)

		Results of the tests
0	PRELIMINARY CHECKS	All OK	Problems met	Operation
	With the engine idling and the gear lever in neutral, press the clutch pedal.Then, with the engine running and the handbrake applied, engage first gear and release the clutch	Continue to Step 1	The noise disappears with the clutch pressed	Continue according to the instructions for theSee table    See table S01 ENGINE KNOCK
			The noise disappears/increases when the clutch is pressed	Continue to Step 1
1	CHECK THRUST BEARING	All OK	Problems met	Operation
	Check the thrust bearing: it should not be worn	Continue to Step 2	Bearing fault	Replace the bearing Op. 1820A30
2	CLUTCH CHECK	All OK	Problems met	Operation
	Check the condition of the clutch plate and springs.	Continue to Step 3	Clutch plate or springs faulty	Replace the clutch plate Op.    Op. 1810A20 CLUTCH - R + R
			No fault found, but defect persists	Continue according to the instructions for theSee table    See table S20 GEARBOX DIFFERENTIAL UNIT NOISY''/ / GENERAL
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	.