1008B10 POWER UNIT FRONT MOUNT (TIMING SIDE) FLEXIBLE BLOCK - REPLACE - Alfa - GT - eLearn

125000880 - 1008B10 POWER UNIT FRONT MOUNT (TIMING SIDE) FLEXIBLE BLOCK - REPLACE

) Position the vehicle on a lift.Proceed with the removal Op. 4450B04 RIGHT FRONT WHEEL R R.Proceed with the removal Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the removal Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Position a hydraulic jack beneath the engine.1. Undo the bolts (1a) and (1b), then remove the power unit front support flexible mounting (1c).

Refitting ( Removing

) 1. Place the power unit front support flexible mounting (1a) in its housing and secure it to the bodyshell tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M8	(Bodyshell side) 3.2 - 3.9

2. Tighten the bolt securing the timing side rigid engine support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	RIGID ENGINE MOUNT, TIMING SIDE	M12	(Flexible mounting side) 7.9 - 9.7

Remove the hydraulic jack from beneath the engine.Proceed with the refitting Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with the refitting Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the refitting Op. 4450B04 RIGHT FRONT WHEEL R R.Remove the vehicle from the lift.