1080B96 LEFT REAR LAMBDA SENSOR ON CATALYTIC CONVERTER R R - Alfa - GT - eLearn

125001126 - 1080B96 LEFT REAR LAMBDA SENSOR ON CATALYTIC CONVERTER R R

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

1. Disconnect the electrical connection for the rear left Lambda sensor to the catalytic converter and release it from its mounting bracket.

	Name	Connector
1	Lambda sensor on catalyzer	See K17 LAMBDA SENSOR ON CATALYZER ( CONNECTORS )

Proceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R R1. Undo and remove the left rear Lambda sensor for the catalytic converter.

Refitting ( Removing

) 1. Place the left rear Lambda sensor for the catalytic converter back in its housing and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	-	LAMBDA SENSOR BEHIND LEFT CONVERTER	M18	4.0 ÷ 5.0

Proceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R R.Connect the electrical connection for the left rear Lambda sensor for the catalytic converter and secure it to the mounting bracket.Connect the negative (-) battery terminalRemove the car from the ramps.