1080B97 RIGHT REAR LAMBDA SENSOR ON CATALYTIC CONVERTER R R - Alfa - GT - eLearn

125001127 - 1080B97 RIGHT REAR LAMBDA SENSOR ON CATALYTIC CONVERTER R R

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

1. Disconnect the electrical connection for the right rear Lambda sensor to the catalytic converter and release it from its mounting bracket.

	Name	Connector
1	Lambda sensor on catalyzer 2	See K18 LAMBDA SENSOR ON CATALYZER 2 ( CONNECTORS )

Proceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R R1. Undo and remove the right rear Lambda sensor for the catalytic converter.

Refitting ( Removing

) 1. Place the right rear Lambda sensor for the catalytic converter back in its housing and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	-	LAMBDA SENSOR BEHIND RIGHT CONVERTER	M18	4.0 ÷ 5.0

Proceed with removal Op. 7055B54 UNDER-ENGINE GUARD - R R.Connect the electrical connection for the right rear Lambda sensor for the catalytic converter and secure it to the mounting bracket.Connect the negative (-) battery terminalRemove the car from the ramps.