125001199 - 1092E16 COUNTER-ROTATING SHAFT DRIVE TOOTHED BELT TENSIONER - R + R

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+RProceed with removalProceed with removal    Op. 4450B04 RIGHT FRONT WHEEL R RProceed with removalProceed with removal    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.1. Completely undo the nut (1a) loosened previously and remove the counter-balance shaft drive belt tensioner (1b).    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 1092E10 COUNTER-ROTATING SHAFT DRIVE TOOTHED BELT - R + R Refitting ( Removing ) Place the counter-balance shaft belt tensioner back in its housing and secure it without tightening the nut.Proceed with refitting    Op. 1092E10 COUNTER-ROTATING SHAFT DRIVE TOOTHED BELT - R + R.Proceed with refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with refitting    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Proceed with refitting    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Remove the car from the ramps.