125001200 - 1092E20 COUNTER-ROTATING SHAFT DRIVE TOOTHED BELTS DRIVE PULLEY - R + R WITH TOOTHED BELT REMOVED
Removing
(
Refitting
)
1. Undo the bolts (1a) and remove the counter-balance shaft drive belt drive pulley (1b).
Refitting
(
Removing
)
Place the counter-balance shaft drive belt drive pulley back in its housing and secure it tightening the bolts to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | COUNTER-ROTATING SHAFT DRIVE PULLEY | M6 | (Timing drive pulley side.) 0.8÷1.0 |