125001201 - 1092E22 COUNTER-ROTATING SHAFT DRIVE TOOTHED BELT DRIVE PULLEY - R + R

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+RProceed with removalProceed with removal    Op. 4450B04 RIGHT FRONT WHEEL R RProceed with removalProceed with removal    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R.1. Undo the bolts (1a) and remove the counter-balance shaft drive belt drive pulley (1b).    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 1092E10 COUNTER-ROTATING SHAFT DRIVE TOOTHED BELT - R + R Refitting ( Removing ) Place the counter-balance shaft drive belt drive pulley back in its housing and secure it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	COUNTER-ROTATING SHAFT DRIVE PULLEY	M6	(Timing drive pulley side.) 0.8÷1.0

Proceed with refitting    Op. 1092E10 COUNTER-ROTATING SHAFT DRIVE TOOTHED BELT - R + R.Proceed with refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with refitting    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Proceed with refitting    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Remove the car from the ramps.