1092E24 COUNTER-ROTATING SHAFT PULLEY - R + R WITH TOOTHED BELT REMOVED - Alfa - GT - eLearn

125001202 - 1092E24 COUNTER-ROTATING SHAFT PULLEY - R + R WITH TOOTHED BELT REMOVED

) PROCEED AS FOLLOWS FOR THE LEFT COUNTER-BALANCE SHAFT COVER.1. Undo the bolt (1a) for the left counter-balance shaft pulley using the tool (1b) for counter-torque.

	Name	Country
1b	Counter-torque	1.820.286.000

2. Remove the left counter-balance shaft pulley.

PROCEED AS FOLLOWS FOR THE RIGHT COUNTER-BALANCE SHAFT COVER.1. Undo the bolt (1a) for the right counter-balance shaft pulley using the tool (1b) for counter-torque.

	Name	Country
1b	Counter-torque	1.820.286.000

2. Remove the right counter-balance shaft pulley.

Refitting ( Removing

) PROCEED AS FOLLOWS FOR THE RIGHT COUNTER-BALANCE SHAFT COVER.1. Place the right counter-balance shaft pulley back in its housing.2. Tighten the bolts (2a) for the right counter-balance shaft pulley to the recommended torque using the tool (2b) for counter-torque.

	Fastening	Component	Ø	Value(daNm)
2a	Bolt	COUNTER-ROTATING SHAFT PULLEY	M10	(Counter balance shaft side) 4.5 ÷ 5.5

	Name	Country
2b	Counter-torque	1.820.286.000

PROCEED AS FOLLOWS FOR THE LEFT COUNTER-BALANCE SHAFT COVER.1. Place the left counter-balance shaft pulley back in its housing.2. Tighten the bolts (2a) for the left counter-balance shaft pulley to the recommended torque using the tool (2b) for counter-torque.

	Fastening	Component	Ø	Value(daNm)
2a	Bolt	COUNTER-ROTATING SHAFT PULLEY	M10	(Counter balance shaft side) 4.5 ÷ 5.5

	Name	Country
2b	Counter-torque	1.820.286.000