125001208 - 1092G20 ENGINE COMPONENT SINGLE BELT FIXED TENSIONER - ONE - R + R

Removing ( Refitting ) Position the vehicle on a lift.Proceed with the removal    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Proceed with the removal    Op. 4450B04 RIGHT FRONT WHEEL R R.Proceed with the removal    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with the removal    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the removal    Op. 1092G10 SINGLE ENGINE BELT R R.1. Undo the bolts (1a) and remove the protection (1b).2. Fit the flywheel lock.

	Description	Code
2	Counter-torque	1.860.898.000

1. Undo the bolts (1a) and remove the crankshaft pulley (1b). 1. Remove the cap (1a), undo the bolt (1b) and remove the engine components single belt fixed tensioner (1c). Refitting ( Removing ) 1. Position the engine components single belt fixed tensioner (1a) in its housing and secure it tightening the bolt (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	SINGLE BELT FIXED TENSIONER VARIOUS	M8	2.2 ÷ 2.8

2. Place the plug in its housing in the engine components single belt fixed tensioner. 1. Position the crankshaft pulley (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	CRANKSHAFT PULLEY	M8	2.3 ÷ 2.8

Remove the flywheel lock.

	Description	Code
-	Counter-torque	1.860.898.000

Proceed with the refitting    Op. 1092G10 SINGLE ENGINE BELT R R.Proceed with the refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Proceed with the refitting    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with the refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Proceed with the refitting    Op. 1016A40 IGNITION COIL COVER ON CYLINDER HEAD- R+R.Remove the vehicle from the lift.