125001221 - 1820A26 THRUST BEARING LINKAGE - R + R WITH GEARBOX REMOVED

Removing ( Refitting )

• Remove the thrust bearing.
• Remove the circlip (2a) and the lever (2b).
• Remove the outer non-slip bush.
• Remove the thrust control linkage.
• Remove the inner non-slip bush.

Refitting ( Removing )

• Place the inner non-slip bush back in its housing.
• Place the thrust control linkage back in its housing.
• Place the outer non-slip bush back in its housing.
• Place the lever back in its housing and secure it using the circlip.
• Place the thrust bearing back in its housing.