125001283 - 2127C22 PIPE FROM HYDRAULIC SPEED SELECTION ACTUATOR UNIT TO FLUID RESERVOIR - R R (Smart gearbox)

Removing ( Refitting )

• Position the vehicle on a lift.
• Connect the Examiner diagnostic equipment.
• Select "Alfa Selespeed" on the Examiner.
• Select "Control unit Test" on the Examiner and select "Marelli Selespeed automatic transmission" as the system.
• Press "Active diagnosis" on the Examiner and select "Accumulator depressurization".
• Follow the procedure indicated by the Examiner.

• Remove the electro-hydraulic selection gearbox hydraulic circuit fluid reservoir cap.

• Drain the electro-hydraulic selection gearbox hydraulic circuit fluid reservoir.

•     Op. 4450B02 LEFT FRONT WHEEL R R
•     Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.

• Loosen the band and disconnect the pipe from the electro-hydraulic selection activation hydraulic unit to the fluid reservoir, reservoir side.

•     Op. 5530B10 BATTERY - R+R
•     Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.

• Loosen the band and disconnect the pipe from the electro-hydraulic selection hydraulic actuator unit to the fluid reservoir, hydraulic actuator unit side and remove it.

Refitting ( Removing )

• Place the pipe from the electro-hydraulic selection hydraulic actuator unit to the fluid reservoir in position, connect it on the hydraulic unit side and tighten the band.
• Connect the pipe from the electro-hydraulic selection activation hydraulic unit to the fluid reservoir, reservoir side and tighten the band.
•     Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.
•     Op. 4450B02 LEFT FRONT WHEEL R R
•     Op. 0010T47 HYDRAULIC SYSTEM FLUID FOR GEARBOX WITH HYDRAULIC SELECTION CHECK LEVEL AND TOP UP IF NECESSARY
•     Op. 0010T48 HYDRAULIC SYSTEM FOR GEARBOX WITH HYDRAULIC SELECTION BLEED AIR
•     Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.
•     Op. 5530B10 BATTERY - R+R
• Remove the vehicle from the lift.