125001291 - 2127E42 HYDRAULIC SELECTION GEARBOX SHIFT POSITION SENSOR - R R (Smart gearbox)

Removing ( Refitting )

1. Disconnect the electrical connection from the gear selection solenoid valve 2.
DescriptionConnector
1Solenoid valve 2 (gear engagement) See L52 SOLENOID 2 (GEAR SHIFT)
2. Disconnect the electrical connection from the gear selection solenoid valve 1.
DescriptionConnector
2Solenoid valve 1 (gear engagement) See L51 SOLENOID 1 (GEAR SHIFT)
1. Disconnect the electrical connection from the electro-hydraulic selection gearbox position sensor.
DescriptionConnector
1Gear engagement potentiometer See K69 GEAR SHIFT POTENTIOMETER
2. Undo the bolts (2a) and remove the electro-hydraulic selection gearbox gear engagement position sensor (2b).
Refitting ( Removing )

  • Place the electro-hydraulic selection gearbox gear selector position sensor back in its housing and secure it using the bolts.
  • Connect the electrical connection to the electro-hydraulic selection gearbox position sensor.
  • Connect the electrical connection to the gear engagement solenoid valve 1.
  • Connect the electrical connection to the gear engagement solenoid valve 2.
  •     Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.
  •     Op. 5530B10 BATTERY - R+R