125001292 - 2127E44 HYDRAULIC SELECTION GEARBOX CLUTCH POSITION SENSOR - R R (Smart gearbox)

Removing ( Refitting )

•     Op. 5530B10 BATTERY - R+R
•     Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.

1. Release the electrical wiring from the mounting bracket.2. Disconnect the electrical connection from the gear selection solenoid valve 2.

	Description	Connector
2	Solenoid valve 2 (gear engagement)	See L52 SOLENOID 2 (GEAR SHIFT)

3. Disconnect the electrical connection from the gear selection solenoid valve 1.

	Description	Connector
3	Solenoid valve 1 (gear engagement)	See L51 SOLENOID 1 (GEAR SHIFT)

1. Disconnect the electrical connection from the electro-hydraulic selection gearbox clutch position sensor.

	Description	Connector
1	Clutch position potentiometer	See K95 CLUTCH POSITION POTENTIOMETER

2. Undo the bolts (2a) and remove the electro-hydraulic selection gearbox clutch position sensor (2b). Refitting ( Removing )

• Place the electro-hydraulic selection gearbox clutch position sensor back in its housing and secure it using the bolts.
• Connect the electrical connection to the electro-hydraulic selection gearbox clutch position sensor.
• Connect the electrical connection to the gear engagement solenoid valve 1.
• Connect the electrical connection to the gear engagement solenoid valve 2.
• Secure the electrical wiring to the bracket.
•     Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.
•     Op. 5530B10 BATTERY - R+R