125001366 - 3340A30 RPM SENSOR (ONE) OF ONE L/H OR R/H FRONT WHEEL - R+R

Removing ( Refitting ) Position the vehicle on a lift.Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
DescriptionConnector
-Battery See A1B BATTERY ( BATTERY NEGATIVE )

1. Disconnect the electrical connection for the front wheel rpm sensor.
DescriptionConnector
1Left front wheel sensor for ABS See K70 LEFT FRONT WHEEL SENSOR FOR ABS ( FRONT )
DescriptionConnector
1Right front wheel sensor for ABS See K71 RIGHT. FRONT WHEEL SENSOR FOR ABS
1. Release the electrical wiring for the front wheel rpm sensor from the fastenings in the wheel arch.2. Undo the bolt (2a) and remove the front wheel rpm sensor (2b) complete with electrical wiring.
Refitting ( Removing ) Place the front wheel rpm sensor back in its housing complete with electrical wiring and secure it tightening the bolt to the recommended torque.
FasteningComponentØ  Value(daNm)
-BoltFRONT WHEEL RPM SENSOR (ABS)M60.7 ÷ 0.9
Secure the electrical wiring for the front wheel rpm sensor to the fastenings in the wheel arch.Place the electrical wiring for the front wheel rpm sensor back in its housing in the engine compartment and connect the electrical connection.

Connect the negative battery terminal (-).Remove the vehicle from the lift.